Mechanical Engineering Science

Research and Analysis of Shear Performance of Inclined Blade Shears Based on ANSYS

YUMeili (Yingkou Institute of Technology), XUGuangchen (Yingkou Institute of Technology)

Abstract


Nowadays, enterprise customers have higher and higher requirements for steel plate quality, and the performance research of shearing machine has been widely paid attention to. In this paper, the finite element analysis software ANSYS is used to analyze and verify the key parts of the downcut inclined blade shears. Through continuous analysis and improvement of the model, the weak points are optimized to improve the shear performance and production efficiency of the shears.

Keywords


ANSYS; Shear quality; Shear property

Full Text:

PDF

References


Xu Kuan, Xia Mingsheng, Liu Jingbao, et al. Simulation of disc shear blade Stress based on Gissmo Material failure criteria [J]. Journal of Plasticity Engineering, 2021,28(9):110-116.

Chen Baosong. Optimization Analysis of Disc Cutting Device for Cold Rolling Strip Steel [J]. Shanxi Metallurgy, 2023, 46(4):227-229.

Wang Zhenhong. Mechanism Optimization of Rolling Shear and Topological Optimization of Upper Tool Rest [D]. Dalian Jiaotong University, 2012.

Melya Dyanasari Sebayang,Erlangga Kustyawan. Design of material transfer automation in shearing machine[J]. IOP Conference Series: Materials Science and Engineering, 2018,420(1):1.

Xu Yunxiang. Optimization design of Hydraulic Brake shears frame based on ANSYS [D]. Shandong University of Science and Technology, 2018.

Sheng Aijun, Yang Ruiyu, Chen Lunshu, et al. Structure Optimization of Medium and thick plate shear line Equipment [J]. China Heavy Equipment, 2022(2):13-15.

Chen Baosong. Optimization Analysis of Disc Cutting Device for Cold Rolling Strip Steel [J]. Shanxi Metallurgy, 2023,46(4):227-229.

Li Ping. Analysis of Factors influencing the shape control System of hot rolled strip head-and-tail shear [J]. Metallurgical Automation, 2019,47(S1):282-287.

Dong Guiwei, ZHAO Guoqun, Yan Jun, et al. Development and application of Virtual simulation design system for tracking shears based on SolidWorks [J]. Experimental Technology and Management, 2021, 38(4):132-135,140.

Bai Huijie, An Weiwei. Analysis on the Relationship between Shearing Force and Section Morphology of Sheet Shears [J]. Forging Equipment & Manufacturing Technology, 2021,56(1):88-90,99.

Qiu Lin. Design and Research of High Speed Shearing machine frame based on ANSYS [J]. Journal of Liaoning University of Technology (Natural Science Edition), 2014, 34(2):103-106.




DOI: https://doi.org/10.33142/mes.v5i1.12712

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Meili YU, Guangchen XU

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.