Mechanical Engineering Science

Design of High Precision CNC Vertical Lathe Turning Tool Holder

ZHANGWenwu (Yingkou Institute of Technology), XUGuangchen (Yingkou Institute of Technology), QIANLin (Yingkou Institute of Technology), WANGMantong (Yingkou Institute of Technology)

Abstract


A large aspect ratio vibration reducing tool holder based on passive damping vibration reduction technology is designed to solve the vibration problem that occurs in deep hole machining of vertical lathes.A dynamic model of passive damping vibration reduction tool holder was established, and the optimal damping ratio, optimal frequency ratio, and maximum relative amplitude were derived. Modal analysis of the passive damping vibration reduction tool holder was conducted using software.The results showed that the maximum response amplitude of the passive damping vibration reduction tool holder decreased significantly compared to the original one.

Keywords


CNC vertical lathe; Cutting chatter; Cutting tool holder

Full Text:

PDF

References


Qin Bai.Study on Dynamic Characteristics Simulation and Optimization Design of Dynamical Vibration Absorption Boring Bar with Damping [J]. Harbin University of Science and Technology, 2009(24):11-19.

Hou Xueyuan, Ren Xueoing, Ren Chong. Structure Design and Dynamic Characteristic Simulation Study of a Vibration Damping Boring Cutter [J]. MACHINE TOOL&HYDRAULICS, 2010(47):21-25.

Yang Liyu.Optimization Design and Simulation Study of Particle Damping and Magnetorheological Composite Damping Boring Cutter [D].North University,2018.

He Miao.Dynamic Characteristics Analysis and Optimization Design of Dynamic Damping Boring Bar [D]. Southeast University For the Academic Degree of Master of Engineering, 2018.

Du Jingxuan. Study on Theory and Experiments for Damping Tools with High Slenderness Ratio [D]. North University, 2013, 4(12):25-29.

Shen Xingquan, Ma teng, Gao Weijia.Research on Flutter Suppressing Device of Deep Hole Machining Based on Magnetorheological Effects [J]. 2017(12):45-19.

Liu Lijia, Liu Xianl. Comprehensive survey of vibration control technology in machining [J]. International Journal of Hybrid Information Technology, 2015, 8(4):307-316.




DOI: https://doi.org/10.33142/mes.v5i1.12715

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Wenwu ZHANG, Guangchen XU, Lin QIAN, Mantong WANG

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.