Mechanical Engineering Science

Design and Numerical Simulation of Dust Removal System for Sutomotive Iongitudinal Beam Plasma Cutting

GAOWenqiang (Changchun Technical University of Automobile), MAXudong (Changchun Technical University of Automobile), TIANHeyu (Changchun Technical University of Automobile)

Abstract


To improve the poor efficiency of the dust removal system in the plasma cutting station of automotive longitudinal beams, and reduce the cutting surface quality degradation due to dust, a bottom-side suction dust removal system is designed, and the dust removal effect is optimized through the setting of the following dampers and diversion plates. The result of numerical simulation indicates that the particle collection rate can reach 99.44%, and the field test also proves the effectiveness of the dust removal system, which is of guiding significance for the transformation of other similar dust removal systems.

Keywords


plasma cutting; dust removal equipment; simulation

Full Text:

PDF

References


Miaosun Chen. Current Situation and Analysis of Plasma Arc Cutting Machine in China[J]. Welding&Joining, 2006(9):23-25.

Renxiang Ding. Development and application of smoke treatment system for plasma cutting machine[J]. China Foundry Machinery & Technology, 2019,54(6):56-58.

Huayue Jiang, Binghai Xiao, Songling Zhang. Research on Flow Field Simulation and Dust Removal Effects of Vacuum Hood of Laser Cutting Equipment[J]. New Technology & New Process, 2021(1):70-74.

Khettabi R, Songmene V,Masounave J,etal. Under-standing the formation of nano and microparticles during matal cutting [J]. International Journal of Signal System Control and Engineering, 2008, 1(3):203-210.

Dekeyser D,Duga A T,Verboven P,etal.Assessment of orchard sprayers using laboratory experiments and computational fluid dynamics modelling[J]. Biosystems Engineering, 2013, 11(2):157-169.

Yubao Ma, Guoqing Ma. Design and Application of Dust Removal System for Plasma Bevel Cutting [J]. Mechanical Research & Application, 2022, 35(1):101-103.

Chao Chen, Zailiang Chen. Study on the dust produced by laser cutting and dust removal system[J]. China Standardization, 2019(20):247-248.

Yingchuang Lyu, Lu Wang, Shaojun Huang, et al. Improvement of Dust Removal System of CNC Plasma Cutting Machine [J]. Machinery, 2018, 56(12):50-51.

Ligui Jiang, Shukun Cao. Design of a Large Bounding Laser Cutting Machine Partition Dust Removal System [J]. Journal of Shandong Industrial Technology, 2023(3):78-81.

Yanjun CHEN, Junguang MA, Xiaodong ZHANG. Upgrade of Spiral Welded Pipe Plasma Dust Removal Device [J]. Welded Pipe and Tube, 2019, 42(8):43-45+49.

Danyang Feng, Yi Gan, Xinfei Lu. The improved dust removal effect of fine plasma cutting machine In CRRC Zhuzhou Vehicle Co., LTD, The collection in "Yisa Cup" advanced welding technology exchange conference[C]. Beijing: Metal working press, 2021.

Aiwei Liu. Study on dust collector system of laser cutting machine [J]. China Metalforming Equipment & Manufacturing Technology, 2019, 54(6):40-42.

Guangming Hu, Xiaohu Wang, Hongtiao Zhang. Application of dust removal technology in automobile welding and cutting [J]. MW Metal Forming, 2008(14):27-30.

Zhongwei Wu, Jinbing Xia, Xijin Shi. Design and Numerical Simulation of Plasma Welding Fume Removal Devices[J]. China Mechanical Engineering, 2019,30(23):2862-2869.

Wei He. Application of filter dust collector in dust control of CNC plasma cutting machine [J]. MW Metal Forming, 2013(16):28-31.

Qun Wang. Discussion on the application of dust removal device in NC flame plasma cutting [J]. Safety Technology of Special Equipment, 2017(5):58-60.




DOI: https://doi.org/10.33142/mes.v6i1.13226

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Wenqiang GAO, Xudong MA, Heyu TIAN

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.