Mechanical Engineering Science

Aerothermodynamic Design and Flow Characteristics for a S-CO2 Radial Inflow Turbine

HULehao, JIANGYu, DENGQinghua, ZHAOZhuobi, LIJun, FENGZhenping

Abstract


In this paper, a radial inflow turbine is designed for the 150 kW S-CO2 Brayton cycle system, and flow characteristics and off-design performances are analyzed. The design results are accurate and high performances can be achieved for the S-CO2 power system, and the total-static efficiency of 86% and net output power about 285.2 kW can meet the design requirements of S-CO2 cycle system. The results of the flow characteristics show the streamlines of radial inflow turbine distribute uniformly, and the vortexes generated at the shroud of the blade suction surface have little influence on the turbine performances. The off-design performances show the total-static efficiency remains above 80% in the pressure ratio range of 1.6 ～ 2.9, and the output power and mass flow rate increase with the pressure ratio increasing. It is indicated the that the designed turbine has excellent off-design performances and can meet the operation requirements. The study results can provide guidance for S-CO2 radial inflow turbine design and operation.

Keywords


supercritical carbon dioxide; radial inflow turbine; flow characteristics; off-design performances

Full Text:

PDF

References


Angelino G. Carbon dioxide condensation cycles for power

production. Journal of Engineering for Gas Turbines and

Power 1968, 90: 287-295.

Feher E G. The supercritical thermodynamic power cycle.

Energy Conversion 1968, 8: 85-90.

Cao R, Li Z G, Deng Q H, et al. Design and aerodynamic

performance investigations of supercritical carbon dioxide

centrifugal compressor. Proceedings of ASME Turbo Expo

: Turbomachinery Technical Conference and

Exposition, Virtual Online, June 7-11, 2021; The American

Society of Mechanical Engineers, New York, US.

Xu J L, Sun E H, Li M J,et al. Key issues and solution

strategies for supercritical carbon dioxide coal fired power

plant. Energy 2018, 157: 227-246.

Dostal V, Driscoll M J, Hejzlar P. A supercritical carbon dioxide

cycle for next generation nuclear reactors; Massachusetts

Institute of Technology: Cambridge, US, 2004.

Bru K, Friedman P, Dennis R. Applications of supercritical

carbon dioxide based power cycle; Woodhead Publishing:

Duxford, UK, 2017.

Wright S A. Summary of the sandia supercritical CO2

development program supercritical carbon dioxide power cycle

symposium; Sandia National Laboratory: Boulder, US, 2010.

Clementoni E M, Cox T L. Practical aspects of supercritical

carbon dioxide Brayton system testing. 4th International

Symposium-Supercritical CO2 Power Cycles, Pittsburgh,

Pennsylvania, September 9-10, 2014; Southwest Research

Institute, Texas, US.

Fleming D D, Pasch J J, Conboy T M,et al. Corrosion and

erosion behavior in supercritical CO2 power cycles; Sandia

National Laboratory: Boulder, US, 2011.

Clementoni E M, Kimball K J. Supercritical carbon dioxide

Brayton power cycle development overview. Proceedings

of ASME Turbo Expo 2012: Turbomachinery Technical

Conference and Exposition, Copenhagen, Denmark, June

-15, 2012; The American Society of Mechanical

Engineers, New York, US.

Clementoni E M, Cox T L, Sprague C P. Startup and

operation of a supercritical carbon dioxide Brayton cycle.

Proceedings of ASME Turbo Expo 2013: Turbomachinery

Technical Conference and Exposition, Texas, US, June 3-7,

; The American Society of Mechanical Engineers,

New York, US.

Clementoni E M, Cox T L. Steady-state power operation of

a supercritical carbon dioxide Brayton cycle. Proceedings

of ASME Turbo Expo 2014: Turbomachinery Technical

Conference and Exposition, Düsseldorf, Germany, June

-20, 2014; The American Society of Mechanical

Engineers, New York, US.

Clementoni E M, Cox T L. Comparison of carbon dioxide

property measurements for an operating supercritical

Brayton cycle to the Refprop physical properties database.

Proceedings of ASME Turbo Expo 2014: Turbomachinery

Technical Conference and Exposition, Düsseldorf,

Germany, June 16-20, 2014; The American Society of

Mechanical Engineers, New York, US.

Cho J, Choi M, Baik Y,et al. Development of the

turbomachinery for the supercritical CO2 power cycle.

International Journal of Energy Research 2015, 40: 587-599.

Cho J, Shin H, Ra H S,et al. Development of the

supercritical carbon dioxide power cycle experimental

loop in KIER. Proceedings of ASME Turbo Expo 2016:

Turbomachinery Technical Conference and Exposition,

Seoul, South Korean, June 13-27, 2014; The American

Society of Mechanical Engineers, New York, US.

Baik Y.J, Cho J, Kim M,et al. Current R&D status of the

supercritical carbon dioxide power cycle in KIER. 13th

International Conference on Sustainable Energy

technologies, Geneva Switzerland, August 25-28, 2014;

HES-SO University, Geneva, Switzerland.

Cho J, Ryong S, Minsung P,et al. Design of a small-scale

supercritical carbon dioxide power cycle experimental

loop. 13th International Conference on Sustainable Energy,

technologies, Geneva Switzerland, August 25-28, 2014;

HES-SO University, Geneva, Switzerland.

Zhou A Z, Song J, Li X S,et al. Aerodynamic design and

numerical analysis of a radial inflow turbine for the

supercritical carbon dioxide Brayton cycle. Applied

Thermal Engineering 2018, 132: 245-255.

Rahual A B, Andrew M, Rajkeshar S,et al. Conceptual design

of 50 MWe and 450 MWe supercritical CO2 turbomachinery

trains for power generation from coal. Part 1: Cycle and

turbine. 5th International Symposium-Supercritical CO2

Power Cycles, Texas, US, March 28-31, 2016; Southwest

Research Institute, Texas, US.

Rahual A B, Grant M, Day M,et al. Conceptual designs of

MWe and 450 MWe supercritical CO2 turbomachinery

trains for power generation from coal. Part 2:

Compressors. 5th International Symposium-Supercritical

CO2 Power Cycles, Texas, US, March 28-31, 2016;

Southwest Research Institute, Texas, US.

Wright S A, Pickard P S, Fuller R,et al. Supercritical CO2

Brayton cycle power generation development program and

initial test results. Proceedings of the ASME 2009: ASME

Power Conference, New Mexico, USA. July 21-23, 2009,

The American Society of Mechanical Engineers, New York,

US.

Balje O E, Binsley R L. Axial turbine performance

evaluation Part a: loss-geometry relationship. Journal of

Engineering for Power, Transaction of the ASME, 1968, 90:

-348.

Balje O E. A contribution to the problem of designing radial

turbomachines, Transaction of the ASME 1952, 74: 451.

Jiang Y. Comprehensive design of supercritical carbon

dioxide power cycle prototype optimization system

thermodynamic performance. Master Thesis, Xi'an

Jiaotong University, Xi'an, 2019.

Zhang H Z, Zhao H, Deng Q H,et al. Aerothermodynamic

design and numerical investigation of supercritical carbon

dioxide turbine. Proceedings of ASME Turbo Expo 2015:

Turbomachinery Technical Conference and Exposition,

Montreal, Canada, June 15-19, 2015; The American

Society of Mechanical Engineers, New York, US.




DOI: https://doi.org/10.33142/mes.v3i2.6724

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Lehao HU, Yu JIANG, Qinghua DENG, Zhuobi ZHAO, Jun LI, Zhenping FENG

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.