复杂富水地层盾构掘进速率评价及预测方法研究
摘要
关键词
全文:
PDF参考
刘泉声,刘建平,潘玉丛,等.硬岩隧道掘进机性能预测模型研究进展[J].岩石力学与工程学报,2016,35(1):2766-2786.
龚秋明,赵坚,张喜虎.岩石隧道掘进机的施工预测模型[J].岩石力学与工程学报,2004,23(2):4709-4714.
王旭,李晓,李守定.关于用岩体分类预测TBM掘进速率AR的讨论[J].工程地质学报,2008,16(4):470-475.
赵海鸣,舒标,夏毅敏,等.基于磨料磨损的TBM滚刀磨损预测研究[J].铁道科学与工程学报,2014,11(4):152-158.
Ozdemir L. Development of Theoretical Equation for Predicting Tunnel Boreability[D]. Golden: Colorado School of Mines,1977.
Bruland A. Hard rock tunnel boring advance rate and cutter wear[D]. Trondheim: Norwegian Institute of Technology,1999.
张照煌.全断面岩石掘进机盘形滚刀寿命管理理论及技术研究[D].北京:华北电力大学,2008.
张照煌.全断面岩石掘进机及其刀具破岩理论[M].北京:中国铁道出版社,2003.
Yagiz S. Development of rock fracture and brittleness indices to quantify the effects of rock mass features and toughness in the CSM model basic penetration for hard rock tunneling machines [D]. Golden: Colorado School of Mines, Doctorial Thesis,2002.
李刚,于天彪,费学婷,等.一种基于CSM模型的TBM刀盘比能预测方法[J].东北大学学报(自然科学版),2012,33(12):1766-1769.
苏文德,周建军,彭正勇.海底泥水盾构最小带压进仓压力计算[J].人民长江,2019,50(2):127-130.
杨旸,谭忠盛,彭斌,等.富水圆砾地层土压平衡盾构掘进参数优化研究[J].土木工程学报,2017,50(1):94-98.
王柳善,杨龙才,孟庆明.富水卵漂石地层土压平衡盾构施工参数研究[J].华东交通大学学报,2015,32(6):14-19.
Gong Q M, Zhao J. Development of a rock mass characteristics model for TBM penetration rate prediction[J]. International Journal of Rock Mechanics & Mining Sciences,2009,46(1):8-18.
李杰,张斌,付柯,等.基于现场掘进数据的复合地层盾构掘进性能预测方法研究[J].现代隧道技术,2019,56(4):97-104.
Hassanpour J, Rostami J, Khamehchiyan M. TBM Performance Analysis in Pyroclastic Rocks: A case history of Karaj water conveyance tunnel[J]. Rock Mechanics and Rock Engineering,2010(43):427-445.
Jeong H Y, Cho J W, Jeon S, et al. Performance assessment of hard rock TBM and rock boreability using punch penetration test[J]. Rock Mechanics and Rock Engineering,2016(49):1517-1532.
DOI: https://doi.org/10.33142/sca.v6i12.10632
Refbacks
- 当前没有refback。
版权所有(c){$ COPYRIGHTYEAR} {$ copyrightHolder}
此作品已接受知识共享署名-非商业性使用 4.0国际许可协议的许可。