临床医学与护理

Design and Application of Customized Personalized Prostheses

LIMingyang, WANGKunbo, WANGJianchao, CHANGLulu, CHENLiye, SHENBiao

摘要


The article introduces the advantages and characteristics of customized personalized prostheses, as well as their applications in orthopedic surgery, dental treatment, cranial reconstruction, and cosmetic surgery. It elaborates on the process of designing and applying customized personalized prostheses, using customized acetabular revision prostheses as an example. The article discusses in detail the process of designing customized personalized prostheses based on the Paprosky or AAOS classification, combined with clinical demand. The personalized prostheses are ultimately manufactured using advanced technologies such as 3D printing. Finally, the article looks towards the future development prospects of customized personalized prostheses.

关键词


customized individualized prostheses; revision prosthesis; acetabular defect classification; 3D printing; prosthesis design

全文:

PDF

参考


Liu Z, Zhang X, Xu Y, et al.. Customized three-dimensional printed titanium prosthesis for pelvic tumors: a case series and initial clinical experience [J]. World Neurosurg, 2019(127):e1212-e1219.

Woo S, Lee YK, Kim HJ, et al.. Customized hemiarthroplasty using 3D printing for an osteoid osteoma of the proximal femur. J Orthop Surg (Hong Kong), 2020,28(2):2309499020914861.

Sun H, Li F, Wu Z, et al. Application of customized acetabular cups in total hip arthroplasty for developmental dysplasia of the hip: A retrospective study [J]. Medicine (Baltimore), 2019,98(37):e16913.

Gao, L., Zhang, G., & Wang, Y. Research and application of individualized 3D printing technology in prosthesis design [J]. Journal of Medical Imaging and Health Informatics, 2011, 11(1), 56-63.

Wong, K. C., Kumta, S. M., & Geel, N. V. 3D printing of orthopaedic implants: a review of clinical applications [J]. Journal of Orthopaedic Translation,2020(23): 91-107.

Mazzoli A, Margalit A, Lee JC. Patient-specific implants using 3D printing: a practical approach. In: Gragnaniello C, editor. 3D printing in neurosurgery [J]. Cham: Springer International Publishing; 2019:25-41.

Katić V, Gulan G, Vukićević S, et al.. The Importance of Radiographic Parameters in Planning Personalized 3D-Printed Hip Endoprosthesis [J]. Materials (Basel), 2020,13(9):2123.

Liu Z, Li M, Huang W, et al.. Design and evaluation of a personalized 3D printed hip implant for Crowe III/IV developmental dysplasia of the hip [J]. J Orthop Surg Res. 2019,14(1):421.

Hsu SH, Huang WC, Lee TH, et al.. Patient-specific implants in acetabular fracture fixation[J]. Injury. 2016, 47(1):83-8. [10] Han M, Zhai D, Ma T, et al.. 3D-printed scaffolds in the reconstruction of bone and cartilage [J]. J Biomed Mater Res A. 2019, 107 (11):2439-58.

Yu J, Liu W, Duan X, et al.. Three-dimensional-printed artificial bone scaffold combined with autologous bone marrow-derived mesenchymal stem cells for repairing bone defect in rabbit tibia [J]. Biomed Mater. 2019,14(6):065005.

Xiong L, Gao Z, Chen S, Chen S, Chen S, Wu Z, et al. Customized Three-Dimensional Printed Titanium Mesh for Cranial Repair [J]. World Neurosurg. 2017(105):632-8.

Mazzoli A, Margalit A, Lee JC. Patient-specific implants using 3D printing: a practical approach. In: Gragnaniello C, editor. 3D printing in neurosurgery [J]. Cham: Springer International Publishing; 2019(2): 25-41.

Han J, Li B, Liu J, et al.. Customized 3D printed prosthesis augmented the partial ulnar head replacement for a giant cell tumor in the ulna: A case report [J]. Medicine (Baltimore). 2018, 97(35):e12054.

Kim YJ, Kim HN, Jeong YJ, et al.. Customized three-dimensional printing total talar prostheses for the treatment of end-stage talar osteonecrosis: a case series [J]. BMC Muscu loskelet Disord. 2020, 21(1):237.

Li X, He Q , Li Z, et al.. A custom-made 3D-printed prosthesis for a patient with pelvic chondrosarcoma [J]. Orthop Surg. 2019, 11(2):332-339.

Xu N, Wei F, Liu X, et al. Design and clinical application of customized femoral prosthesis using computer-aided technologies [J]. J Orthop Surg Res. 2019, 14(1):263.

Chang JB, Chen WC, Chang YS, et al. Clinical application of 3D printing technology on hip joint reconstruction after bone tumor resection [J]. J Formos Med Assoc. 2019, 118(2):S155-S163.

Rivard CH, Rhalmi S, Coillard C, et al. Custom 3D-printed implants in treating a variety of orthopedic conditions: A review of clinical experience [J]. J Clin Orthop Trauma. 2021(12):329-334.

Yang S, Zhou Y, Zhang Y, et al. Customized 3D-printed hemipelvic endoprosthesis for the treatment of primary malignant bone tumor of the acetabulum [J]. J Orthop Surg Res. 2020, 15(1):547.

Zhang L, Wang Y, Shi X, et al. Customized hip hemiarthroplasty using a 3D-printed femoral prosthesis in revision of periprosthetic femoral fractures: A case series [J]. Medicine (Baltimore). 2018, 97(35):e12027.

Gao J, Shi J, Liu C, et al. Custom-made acetabular reconstruction using 3D printing and rapid prototyping technology [J]. J Arthroplasty. 2019, 34(5):967-973.




DOI: https://doi.org/10.33142/cmn.v1i1.8869

Refbacks

  • 当前没有refback。