梯度变形加工改善低碳钢的力学性能
摘要
关键词
全文:
PDF参考
K. Lu, The future of metals [J]. Science,2010(328):319-320.
K. Lu, L. Lu, S. Suresh, Strengthening materials by engineering coherent internal boundaries at the nanoscale [J]. Science,2009(324):349-352.
R. Valiev, Nanostructuring of metals by severe plastic deformation for advanced properties [J]. Nat. Mater,2004(324):511-516.
J. H. Hollomon, Tensile deformation [J]. AIME Trans,1945(12):1-22.
K. Yamanaka, M. Mori, S. Kurosu, H. Matsumoto, A. Chiba, Ultrafine grain refinement of biomedical Co-29Cr-6Mo alloy during conventional hot-compression deformation. Metall [J]. Mater. Trans. A,2009(40):1980-1994.
Y. Saito, H. Utsunomiya, N. Tsuji, T. Sakai, Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (ARB) process [J]. Acta Mater,1999(47):579-583.
N. Tsuji, R. Ueji, Y. Minamino, Nanoscale crystallographic analysis of ultra?ne grained IF steel fabricated by ARB process [J]. Scr. Mater,2002(47):69-76.
Y. Shi, M. Li, D. Guo, T. Ma, Z. Zhang, G. Zhang, X. Zhang, Tailoring grain size distribution for optimizing strength and ductility of multi-modal Zr [J]. Mater. Lett,2013(108):228-230.
R. Z. Valiev, T. G. Langdon, Principles of equal-channel angular pressing as a processing tool for grain refinement [J]. Prog. Mater. Sci,2006(51):881-981.
X. Zhang, A. Godfrey, X. Huang, N. Hansen, Q. Liu, Microstructure and strengthening mechanisms in cold-drawn pearlitic steel wire [J]. Acta Mater,2011(59):3422-3430.
R. Z. Valiev, I. V. Alexandrov, Y. T. Zhu, T. C. Lowe, Paradox of strength and ductility in metals processed by severe plastic deformation [J]. J. Mater. Res,2002(17):5-8.
X. Wu, M. Yang, F. Yuan, G. Wu, Y. Wei, X. Huang, Y. Zhu, Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility [J]. Proc. Natl. Acad. Sci,2015(112):14501-14505.
T.H. Fang, W.L. Li, N.R. Tao, K. Lu, Revealing extraordinary intrinsic tensile plasticity in gradient nano-grained copper [J]. Science,2011(331):1587-1590.
X. Yang, X. Ma, J. Moering, H. Zhou, W. Wang, Y. Gong, J. Tao, Y. Zhu, X. Zhu, In?uence of gradient structure volume fraction on the mechanical properties of pure copper. Mater. Sci [J]. Eng. A,2015(645):280-285.
Y. Wei, Y. Li, L. Zhu, Y. Liu, X. Lei, G. Wang, Y. Wu, Z. Mi, J. Liu, H. Wang, H. Gao, Evading the strength-ductility trade-off dilemma in steel through gradient hierarchical nanotwins [J]. Nat. Commun,2014(5):67-69.
Y. M. Wang, E. Ma, M. W. Chen, Enhanced tensile ductility and toughness in nanostructured Cu [J]. Appl. Phys. Lett,2002(80):2395-2397.
R. O. Ritchie, The conflicts between strength and toughness [J]. Nat. Mater,2011(10):817.
M. E. Launey, R. O. Ritchie, On the Fracture Toughness of Advanced Materials [J]. Adv. Mater,2009(21):2103-2110.
E. O. Hall, The deformation and ageing of mild steel: III discussion of results [J]. Proc. Phys. Soc. B,1951(64):747-753.
A. Galiyev, R. Kaibyshev, G. Gottstein, Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60 [J]. Acta Mater,2001(49):1199-1207.
Z. Zeng, X. Li, D. Xu, L. Lu, H. Gao, T. Zhu, Gradient plasticity in gradient nano-grained metals [J]. Extreme Mech. Lett,2016(8):213-219.
K. Lu, Making strong nanomaterials ductile with gradients [J].Science,2014(345):1455-1456.
M. Yang, Y. Pan, F. Yuan, Y. Zhu, X. Wu, Back stress strengthening and strain hardening in gradient structure [J]. Mater. Res. Lett,2016(4):145-151.
DOI: https://doi.org/10.33142/ec.v6i9.9409
Refbacks
- 当前没有refback。
版权所有(c){$ COPYRIGHTYEAR} {$ copyrightHolder}
![Creative Commons License](http://licensebuttons.net/l/by-nc/4.0/88x31.png)
此作品已接受知识共享署名-非商业性使用 4.0国际许可协议的许可。