Mechanical Engineering Science

Design of Plastic Injection Mold with Support Strip Based on CAD/CAE

ZHANGWenwu (Yingkou Institute of Technology), XUGuangchen (Yingkou Institute of Technology)

Abstract


The structural characteristics of plastic parts containing support strips were analyzed, and Moldflow software was used to simulate and analyze the pouring position and cooling system of the plastic parts to determine the optimal solution. The UG-Moldwizard module was used to complete the mold base design of the injection mold, which reduced the potential risks in the design of the injection mold, improved the quality of the mold, and reduced the number of mold trials. It fully demonstrated the role of CAE technology in the design of the pouring system and the development process of the injection mold. The outstanding role it plays in the process can provide reference value for the design of injection molds similar to plastic parts.

Keywords


CAD; CAE; injection mold; support strip

Full Text:

PDF

References


Zhang Liuwei,Gu Saijun,Hong Wei,et al.Design of Large Injection Mould for Automotive Front Frame with Inserts based on CAE Technology[J]. Engineering Plastics Application, 2023,51(2):91-98.

Zhan Yougang. UG NX7.0 Mold Design Tutorial[M]. Bei Jing: Mechanical Industry Press, 2011.

Li Chunling. CAE Technology Based on the Chassis Cover Inverted Injection Mold Design[J]. Plastics, 2020,49(4):50-54.

Qu Huacang. Plastic molding process and mould design[M]. Bei Jing: Higher Education Press, 2005.

Zhao Ertuan, Tian Yujing, Xu Kuan, et al. Injection Mold Design of Fan Cover and Optimization of FormingProcess Based on CAD/CAE[J]. Engineering Plastics Application, 2018,46(10):81-85.

Zhang Jinbiao. Application of injection molding CAE and Moldflow software[M]. Bei Jing: Mechanical Industry Press, 2011.

WU Menglin, ZHANG Long. Parameter Optimization for the Automobile Hood in Injection Molding Based on Orthogonal Method[J]. Plastics, 2009,38(1):5-8.

Chen Hui, Li Mingyao, Wu Huachun. Development of CAD/CAE/CAM technology for mould and its software application[J]. Machinery Design & Manufacture, 2011(6):238-240.




DOI: https://doi.org/10.33142/mes.v6i2.15054

Refbacks

  • There are currently no refbacks.


Copyright (c) 2025 Wenwu ZHANG, Guangchen XU

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.