Mechanical Engineering Science

Embedded Sensor System for Five-degree-of-freedom Error Detection on Machine Tools

HuangYubin, FanKuang-Chao, SunWei

Abstract


Any linear stage of machine tool has inherent six-degree-of-freedom (6-DOF) geometric errors. Its motion control system, however, has only the position feedback. Moreover, the feedback point is not the commanded cutting point. This is the main reason why the positioning error along each axis and the volumetric error in the working space are inevitable. This paper presents a compact 5-DOF sensor system that can be embedded in each axis of motion as additional feedback sensors of the machine tool for the detection of three angular errors and two straightness errors. Using the derived volumetric error model, the feedback point can be transferred to the cutting point. The design principle of the developed 5-DOF sensor system is described. An in-depth study of systematic error compensation due to crosstalk of straightness error and angular error is analyzed. A prototype has been built into a three-axis NC milling machine. The results of a series of the comparison experiments demonstrate the feasibility of the developed sensor system.

Keywords


5-DOF geometric motion errors; linear axis; measurement; systematic error compensation

Full Text:

PDF

References


Schwenke H, Knapp W, Haitjema H, et al. Geometric error measurement and compensation of machines—an update[J]. CIRP Annals, 2008, 57(2): 660-675.

Ibaraki S, Knapp W. Indirect measurement of volumetric accuracy for three-axis and five-axis machine tools: a review[J]. International Journal of Automation Technology, 2012, 6(2): 110-124.

Ibaraki S, Sawada M, Matsubara A, et al. Machining tests to identify kinematic errors on five-axis machine tools[J]. Precision Engineering, 2010, 34(3): 387-398.

Ibaraki S, Ota Y. A machining test to evaluate geometric errors of five-axis machine tools with its application to thermal deformation test[J]. Procedia CIRP, 2014, 14: 323-328.

Su Z, Wang L. Latest development of a new standard for the testing of five-axis machine tools using an S-shaped test piece[J]. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2015, 229(7): 1221-1228.

Fan K C, Wang H Y, Yang H W, et al. Techniques of multi-degree-of-freedom measurement on the linear motion errors of precision machines[J]. Advanced Optical Technologies, 2014, 3(4): 375-386.

Fan K C, Chen M J, Huang W M. A six-degree-of-freedom measurement system for the motion accuracy of linear stages[J]. International Journal of Machine Tools and Manufacture, 1998, 38(3): 155-164.

Fan K C, Chen M J. A 6-degree-of-freedom measurement system for the accuracy of XY stages[J]. Precision Engineering, 2000, 24(1): 15-23.

Liu C H, Jywe W Y, Hsu C C, et al. Development of a laser-based high-precision six-degrees-of-freedom motion errors measuring system for linear stage[J]. Review of scientific instruments, 2005, 76(5): 055110.

Feng Q, Zhang B, Cui C, et al. Development of a simple system for simultaneously measuring 6DOF geometric motion errors of a linear guide[J]. Optics express, 2013, 21(22): 25805-25819.

Cui C, Feng Q, Zhang B, et al. System for simultaneously measuring 6DOF geometric motion errors using a polarization maintaining fiber-coupled dual-frequency laser[J]. Optics express, 2016, 24(6): 6735-6748.

Gao S, Zhang B, Feng Q, et al. Errors crosstalk analysis and compensation in the simultaneous measuring system for five-degree-of-freedom geometric error[J]. Applied Optics, 2015, 54(3): 458-466.

Zhao Y, Zhang B, Feng Q. Measurement system and model for simultaneously measuring 6DOF geometric errors[J]. Optics express, 2017, 25(18): 20993-21007.

Gillmer S R, Yu X, Wang C, et al. Robust high-dynamic-range optical roll sensing[J]. Optics letters, 2015, 40(11): 2497-2500.

Yu X, Gillmer S R, Ellis J D. Beam geometry, alignment, and wavefront aberration effects on interferometric differential wavefront sensing[J]. Measurement Science and Technology, 2015, 26(12): 125203..

Yu X, Gillmer S R, Woody S C, et al. Development of a compact, fiber-coupled, six degree-of-freedom measurement system for precision linear stage metrology[J]. Review of Scientific Instruments, 2016, 87(6): 065109.

Huang P, Li Y, Wei H, et al. Five-degrees-of-freedom measurement system based on a monolithic prism and phase-sensitive detection technique[J]. Applied optics, 2013, 52(26): 6607-6615.

Wu S M. An on-line measurement technique for machine volumetric error compensation[J]. Ann Arbor, 1993, 1050: 48109.

Huang P S, Ni J. On-line error compensation of coordinate measuring machines[J]. International Journal of Machine Tools and Manufacture, 1995, 35(5): 725-738.

Chen B, Xu B, Yan L, et al. Laser straightness interferometer system with rotational error compensation and simultaneous measurement of six degrees of freedom error parameters[J]. Optics express, 2015, 23(7): 9052-9073.

Li J, Feng Q, Bao C, et al. Method for simultaneous measurement of five DOF motion errors of a rotary axis using a single-mode fiber-coupled laser[J]. Optics express, 2018, 26(3): 2535-2545.

Mutilba U, Gomez-Acedo E, Kortaberria G, et al. Traceability of on-machine tool measurement: a review[J]. Sensors, 2017, 17(7): 1605.

Liu S, Zhang S, Huang Y, et al. The Method for Restraining Laser Drift Based on Controlling Mirror[J]. Nanomanufacturing and Metrology, 2018: 1-8.

Torng J, Wang C H, Huang Z N, et al. A novel dual-axis optoelectronic level with refraction principle[J]. Measurement Science and Technology, 2013, 24(3): 035902.

Bryan J B. The Abbe principle revisited: an updated interpretation[J]. Precision Engineering, 1979, 1(3): 129-132.

Huang Y B, Fan K C, Sun W, Liu S J. Low cost, compact 4-DOF measurement system with active compensation of beam angular drift error. Optics Express, 2018, 26(13): 17185-17198.

Cai Y, Yang B H, Fan K C. A robust roll angular error measurement method for precision machines. Optics Express, 2019, 27(6): 8027-8036.

Liu S, Tan S, Huang Y, et al. Design of a compact four degree-of-freedom active compensation system to restrain laser’s angular drift and parallel drift. Review of Scientific Instruments, 2019, 90(11): 115002.




DOI: https://doi.org/10.33142/me.v1i2.1655

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Yubin Huang, Kuang-Chao Fan, Wei Sun

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.