Study on Vertical Vibration Characteristics of the 2-DOF Strip Rolling Mill Model with a Single Weak Defect on the Work Roll Bearing Outer Raceway

Abstract

Considering the influence caused by a early single pit defect on the outer raceway of the work roll bearing, a 2-DOF plate strip rolling mill vertical vibration model with a single point weak fault on the outer raceway was established. With the practical parameters of the roughing mill of the 1780 hot continuous rolling mill, the vertical vibration characteristics of the rolling mill work roll with different rotating speed and different single pit defect area on the bearing outer raceway are analyzed by numerical simulation. It is found that with the change of the rotation speed of the work roll, different nonlinear vibration behaviors occurred, such as superharmonic resonance, main resonance, com-bined resonance and sub-harmonic resonance. Especially the subharmonic resonance of the work roll is more harmful than the main resonance when the work roll speed is twice the rotation speed corresponding to the first and second natural frequency of the rolling mill. This work provides a theoretical basis for further clarifying the effect caused by a early defect of the work roll bearing on the mill vibration.