Mechanical Engineering Science

Influence of Recirculated Flue Gas Distribution on Combustion and NOx Formation Characteristics in S-CO2 Coal-fired Boiler

WANGPeipei, GUMingyan, FANGYao, JIANGBoyu, WANGMingming, CHENPing

Abstract


Supercritical carbon dioxide (S-CO2 ) Brayton power cycle power generation technology, has attracted more and more scholars' attention in recent years because of its advantages of high efficiency and flexibility. Compared with conventional steam boilers, S-CO2 has different heat transfer characteristics, it is easy to cause the temperature of the cooling wall of the boiler to rise, which leads to higher combustion gas temperature in the furnace, higher NOX generation concentration. The adoption of flue gas recirculation has a significance impact on the combustion process of pulverized coal in the boiler, and it is the most effective ways to reduce the emission of NOX and the combustion temperature in the boiler. This paper takes 1000MW S-CO2 T-type coal-fired boiler as the research target to investigate the combustion and NOX generation characteristics of S-CO2 coal-fired boilers under flue gas recirculation condition, the influence of recirculated flue gas distribution along the furnace height on the characteristics of NOX formation and the combustion of pulverized coal. The results show that the recirculated flue gas distribution has the great impact on the concentration of NOX at the boiler outlet. When the bottom recirculation flue gas rate is gradually increased, the average temperature of the lower boiler decreases and the average temperature of the upper boiler increases slightly; The concentration of NOx at the furnace outlet increases.

Keywords


S-CO2 boiler; Pulverized coal combustion; NOX emission; Flue gas recirculation; Recirculated flue gas distribution

Full Text:

PDF

References


CAO Shuang, LIU Xiulong, ZHANG Ming,et al.Experimental

study of organic Rankine cycle power generation system

under various operating conditions[J]. CHEMICAL

INDUSTRY AND ENGINEERING PROGRESS, 2018,

(01):88-95.

Si N, Zhao Z, Su S,et al. Exergy analysis of a 1000 MW

double reheat ultra-supercritical power plant. Energy

Conversion and Management 2017, 147:155- 65.

Wu Y, Zhang M, Xie X,et al. Hot deformation characteristics

and processing map analysis of a new designed

nickel-based alloy for 700℃ A-USC power plant. Journal of

Alloys & Compounds 2016, 656:119-31.

XU Jinliang, LIU Chao, SUN Enhui,et al. Review and

perspective of supercritical carbon dioxide power cycles[J].

THERMAL POWER GENERATION,

(10):1-10[2020-10-27].

MOISSEYTSEV A, SIENICKI J J. Dynamic control analysis of

the AFR-100 SMR SFR with a supercritical CO2 cycle and dry

air cooling Part I: Plant control

optimization[C]//Proceedings of the 2018, 26th

International Conference on Nuclear Engineering, London,

England, July 22-26, 2018.

MECHERI M, MOULLECLE Y L. Supercritical CO2 Brayton

cycles for coal-fired power plants[J]. Energy, 2016, 103:

-771.

Liao G, Liu L, Jiaqiang E,et al. Effects of technical progress

on performance and application of supercritical carbon

dioxide power cycle: A review[J]. Energy Conversion &

Management, 2019, 199(Nov.):111986.1-111986.23.

Milani D, Luu MT, McNaughton R,et al. Optimizing an

advanced hybrid of solar-assisted supercritical CO2 Brayton

cycle: a vital transition for low-carbon power generation

industry. Energy Conversion and Management 2017,

:1317- 31.

Halimi B, Suh K Y. Computational analysis of supercritical CO2

Brayton cycle power conversion system for fusion reactor.

Energy Conversion and Management 2012, 63:38–43.

Le Moullec Y. Conceptual study of a high efficiency

coal-fired power plant with CO2 capture using a

supercritical CO2 Brayton cycle. Energy 2013, 49:32-46.

Mecheri M, Le Moullec Y. Supercritical CO2 Brayton cycles

for coal-fired power plants. Energy 2016, 103:758-71.

Zhang Y, Li H, Han W,et al. Improved design of

supercritical CO2 Brayton cycle for coal-fired power plant.

Energy 2018, 155:1-14.

Zhou J, Zhang C, Su S,et al. Exergy analysis of a 1000 MW

single reheat supercritical CO2 Brayton cycle coal-fired

power plant. Energy Conversion and Management 2018,

: 348-358.

Yang Y, Bai W, Wang Y, et al. Coupled simulation of the

combustion and fluid heating of a 300 MW supercritical

CO2

boiler. Applied Thermal Engineering 2017,

:259-267.

Cui Y, Zhong W, Xiang J,et al. Simulation on coal-fired

supercritical CO2 circulating fluidized bed boiler: Coupled

combustion with heat transfer. Advanced Powder

Technology, 2019, doi:10.1016/j.apt.2019.09.010.

Bai W, Zhang Y, Yang Y,et al. 300 MW boiler design study

for coal-fired supercritical CO2 Brayton cycle. Applied

Thermal Engineering 2018, 135:66–73.

Liu X, Zhong W, Li P,et al. Design and performance

analysis of coal-fired fluidized bed for supercritical CO2

power cycle. Energy 2019,

doi:10.1016/j.energy.2019.03.170.

Jing Zhou, Meng Zhu, Sheng Su,et al. Numerical analysis

and modified thermodynamic calculation methods for the

furnace in the 1000MW supercritical CO2 coal-fired

boiler[J]. Energy,2020,212.

Jing Zhou. Key issues and practical design for cooling wall

of supercritical carbon dioxide coal-fired boiler[J]. Energy,

Numerical calculation of flow and heat transfer: Study and

discussion on some problems [M]. Science Press, 2015.

Bo Yu, Jingfa Li, Dongliang Sun. Practical Training of

Numerical Heat Transfer[M]. 2018.

Zhou H, Mo G Y, Si D B,et al. Numerical Simulation of the

NOX Emissions in a 1000 MW Tangentially Fired

Pulverized-Coal Boiler: Influence of the Multi-group

Arrangement of the Separated over Fire Air[J]. Energy &

Fuels, 2011, 25(5):2004-2012.

Zhou J, Zhu M, Xu K,et al. Key issues and innovative

double-tangential circular boiler configurations for the

MW coal-fired supercritical carbon dioxide power

plant[J]. Energy, 199.




DOI: https://doi.org/10.33142/mes.v3i2.6728

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Peipei WANG, Mingyan GU, Yao FANG, Boyu JIANG, Mingming WANG, Ping CHEN

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.