Mechanical Engineering Science

Analysis of vibration attenuation characteristics of large thickness carbon fiber composite laminates

WANGYi-Qi, WANGChaoqun, YANGPengxiao, WANGZiao, CAOTete

Abstract


The vibration attenuation and damping characteristics of carbon fiber reinforced composite laminates with different thicknesses were investigated by hammering experiments under free boundary constraints in different directions. The dynamic signal testing and analysis system is applied to collect and analyze the vibration signals of the composite specimens, and combine the self-spectrum analysis and logarithmic decay method to identify the fundamental frequencies of different specimens and calculate the damping ratios of different directions of the specimens. The results showed that the overall stiffness of the specimen increased with the increase of the specimen thickness, and when the thickness of the sample increases from 24mm to 32mm, the fundamental frequency increases by 35.1%, the vibration showed the same vibration attenuation and energy dissipation characteristics in the 0° and 90° directions of the specimen, compared with the specimen in the 45° direction, which was less likely to be excited and had poorer vibration attenuation ability, while the upper and lower surfaces of the same specimen showed slightly different attenuation characteristics to the vibration, the maximum difference of damping capacity between top and bottom surfaces of CFRP plates is about 70%.

Keywords


Carbon fiber composite laminates; Logarithmic decay method; Damping ratio; Natural frequency

Full Text:

PDF

References


Werken N, Tekinalp H, Khanbolouki P, et al, 2019. Additively Manufactured Carbon Fiber-Reinforced Composites: State of the Art and Perspective. Additive Manufacturing, (31): 100962.

Du X, Zhou H, Sun W, et al, 2017. Graphene/epoxy interleaves for delamination toughening and monitoring of crack damage in carbon fibre/epoxy composite laminates. Composites Science and Technology, (140): 123-133.

Venkatachari A, Natarajan S, Haboussi M, et al, 2016. Environmental effects on the free vibration of curvilinear fibre composite laminates with cutouts. Composites Part B, (88): 131-138.

Subramani M, Ramamoorthy M, 2020. Vibration analysis of multiwalled carbon nanotube-reinforced composite shell: An experimental study. Polymers and Polymer Composites, 28(4): 223-232.

Treviso A, Genechten BV, Mundo D, et al, 2015. Damping in composite materials: Properties and models. Composites Part B: Engineering, (78): 144-152.

Yan L, Sc A, Xh A, 2017. Multi-scaled enhancement of damping property for carbon fiber reinforced composites. Composites Science and Technology, (143):89-97.

Zhang J, Yang H, Chen G, 2019. Damping of carbon fibre-reinforced plastics plates with holes. Plastics, Rubber and Composites, 48(10): 432-439.

Mao Y, Young Y L, 2016. Influence of skew on the added mass and damping characteristics of marine propellers. Ocean Engineering, 121: 437-452.

Mulcahy N L, Prusty B G, Gardiner C P, 2010. Hydroelastic tailoring of flexible composite propellers. Ships and Offshore structures, 5(4): 359-370.

Abramovich H, Govich D, Grunwald A, 2015. Damping measurements of laminated composite materials and aluminum using the hysteresis loop method. Progress in Aerospace Sciences, (78): 8-18.

Assarar M, Zouari W, Ayad R, et al, 2018. Improving the damping properties of carbon fibre reinforced composites by interleaving flax and viscoelastic layers. Composites Part B: Engineering, (152): 248-255.

Lin H, Xiang Y, Yang Y, 2016. Coupled vibration analysis of CFRP cable-tube system under parametric excitation in submerged floating tunnel. Procedia engineering, (166):

Gibson R F, 2000. Modal vibration response measurements for characterization of composite materials and structures. Composites Science and Technology, 60(15): 2769-2780.

Zou Y, Tong L, Steven G P, 2000. Vibration-based model-dependent damage (delamination) identification and health monitoring for composite structures - a review. Journal of Sound and vibration, 230(2): 357-378.

Adams R D, Maheri M R, 2003. Damping in advanced polymer-matrix composites. Journal of Alloys & Compounds, 355(1-2): 126-130.

Maheri M R, Adams R D, 2003. Modal vibration damping of anisotropic FRP laminates using the Rayleigh–Ritz energy minimization scheme. Journal of sound and vibration, 259(1): 17-29.

Pei X Y, Li J L, 2012. The effects of fiber orientation on the vibration modal behavior of carbon fiber plain woven fabric/epoxy resin composites. Advanced Materials Research. Trans Tech Publications Ltd, 391: 345-348.

Vescovini R, Bisagni C, 2015. A procedure for the evaluation of damping effects in composite laminated structures. Progress in Aerospace Sciences, 78: 19-29.

Rueppel M, Rion J, Dransfeld C, et al, 2017. Damping of carbon fibre and flax fibre angle-ply composite laminates. Composites Science & Technology, 146: 1-9.

Pereira D A, Guimarães TAM, Resende H B, et al, 2020. Numerical and experimental analyses of modal frequency and damping in tow-steered CFRP laminates. Composite Structures, 244: 112190.

Pereira D A, Sales T P, Rade D A, 2021. Multi-objective frequency and damping optimization of tow-steered composite laminates. Composite Structures, 256: 112932.

Tang X, Yan X, 2020. A review on the damping properties of fiber reinforced polymer composites. Journal of Industrial Textiles, 49(6): 693-721.

Ding G, Xie C, Zhang J, et al, 2016. Modal analysis based on finite element method and experimental validation on carbon fibre composite drive shaft considering steel joints. Materials Research Innovations, 19(sup5): 748-753.




DOI: https://doi.org/10.33142/mes.v4i1.7514

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Yi-Qi WANG, Chaoqun WANG, Pengxiao YANG, Ziao WANG, Tete CAO

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.