Research Progress on the Recycle and Reuse of Wasted Aluminum Substrates of CTP Plates
Abstract
Keywords
Full Text:
PDFReferences
Z. Pavlovic, S. Dedijer, N. Kasikovic, et al. Evaluation of effective models of offset CTP plate aluminium oxide surface roughness characterisation[J]. International Journal of Surface Science and Engineering, 2017, 11(5): 433-449.
Verified Market Reports. CTP Technology Market Size, Global Trends | Forecast[R]. Verified Market Reports, 2023.
Zhiyan Consulting. Research on the Prospect of the Chinese CTP Plate Industry and Competitor Analysis Report for 2022-2028[R]. Beijing: Zhiyan Consulting, 2022.
Q.H. Yang, Y.X. Gao, J. Gao. Current Status and Future Development Trends of Offset Printing Plates[J]. Printing Technology, 2018 (10): 96-101.
M.L. Zhou. Exploring Measures to Improve the Print Resistance of Environmentally Friendly Violet Laser CTP Plates[J]. Printing Magazine, 2022 (02): 69-72.
J. Cao, Q.Y. Ma, P. Yang. Looking at CTP Technology Development from drupa 2016[J]. Printing Technology, 2016 (11): 14-16.
J.Y. Yu, Y.L. Zhao. Exploration of Inkjet Plate Making and Its Printing Applicability[J]. Printing Technology, 2015 (09): 38-40.
F. Chen, Z.W. Liu, Q.Y. Wang, et al. Analysis and Control Methods of Casting Defects in PS/CTP Plate Base Products by Continuous Casting[J]. Nonferrous Metal Processing, 2024, 53(02): 39-41.
S. Yaghoubi, A. Piccininni, M. Seidi, et al. Multi-criteria optimization of the warm hydroforming process of an aluminum component based on the adaptive neuro-fuzzy inference system[J]. Journal of Manufacturing Processes, 2024 (132): 75-92.
G.Z. Jia, Y.C. Huang, Y. Liu, et al. Effects of Cold Rolling Deformation and Baking Treatment on the Microstructure and Properties of CTP Aluminum Plates[J]. Materials Science and Engineering of Powder Metallurgy, 2018, 23(01): 54-62.
Q.L. Huang. Process Research on Plate Shape Optimization for CTP Plate Base[J]. Light Alloy Processing Technology, 2016, 44(08): 35-38.
L.Y. Shen, M. Zhu, B.H. Lang, et al. An Adaptive Detection Algorithm for Flaws on CTP Plates [J]. Journal of Changchun University of Science and Technology (Natural Science Edition), 2014, 37(06): 94-98.
L.L. Liu, Z. Li, J.H. Zhong, et al. Review of Primary Recycling and Reuse of Aluminum Cans [J]. Food Industry, 2022, 43(09): 268-273.
R.Y. Li, Y.W. Wang, B.J. Guo, et al. Research status of scrap aluminum recycling[J]. China Nonferrous Metallurgy, 2024, 53(4): 84-93.
P.H. Liu, C.X. Ye, Q.R. Qian, et al. Research on accurate separation of aluminum-plastic composite packaging waste and reuse of its separated waste liquid[J]. Recyclable Resources and Circular Economy, 2023,16(05): 23-28.
Tetra Pak. Finding the innovative approach: recycling PolyAl into filament for 3D printing [W/OL].Https://www.tetrapak.com/en-pl/insights/cases-articles/recycling-polyal-from-used-beverage-cartons-into-filament-for-3d. (Accessed date: 20th Nov. 2024)
K.H. Gu, J.H. Chang, X.H. Mao, et al. Efficient separation of cathode materials and Al foils from spent lithium batteries with glycerol heating: A green and unconventional way[J]. Journal of Cleaner Production, 2022 (369):133-270.
M.A.M. Alhefnawi, Energy budget in an educational building in KSA: The case of cladding with terracotta and aluminium[J]. Ain Shams Engineering Journal, 2021, 12(3): 3255-3261.
O. Zaheer, G. Ingarao, A. Pirrotta, et al. Geometrical deviation of end-of-life parts as a consequence of reshaping by single point incremental forming[J]. International Journal of Advanced Manufacturing Technology, 2021, 115(5): 1579-1588.
G. Ingarao, O. Zaheer, L. Fratini, Manufacturing processes as material and energy efficiency strategies enablers: The case of Single Point Incremental Forming to reshape end-of-life metal components[J]. CIRP Journal of Manufacturing Science and Technology, 2021 (32): 145-153.
X.T. Li, H. Liu, J.C. You, et al. Back EVA recycling from c-Si photovoltaic module without damaging solar cell via laser irradiation followed by mechanical peeling[J]. Waste Management, 2022 (137): 312-318.
D. Farioli, M. Fabrizio, E. Kaya, et al. Reshaping of thin steel parts by cold and warm flattening [J]. International Journal of Material Forming, 2023, 16(4): 35.
J. Li. Key technology of reusing extrusion die for waste aluminum template[J]. Aluminum Processing, 2021 (4): 58-61.
Fujifilm Corporation. Fujifilm Promotes an Innovative Offset Plate Recycling Program [W/OL]. Bisenet, 09-22-2011. https://bisenet.com/article/201109/105711.htm (Accessed date: 20th Nov. 2024)
S.L. Meng, X. Meng. A Recycling Device for Thermosensitive CTP Plates[P]. Tianjin: CN201821505260.4, 2019-07-05.
BASF. Battery Materials and Recycling Go Hand in Hand: BASF Opens Adjacent Battery Material Production and Recycling Center to Build a Closed-Loop Battery Value Chain in Europe[W/OL]. 2023 July 29. https://www.basf.com/cn/zh/media/news-releases/asia-pacific/ 2023 /07/p-23-251. (Accessed date: 20th Nov. 2024)
R.F. Wei. Research on Surface Defect Identification Technology of Aluminum Profiles Based on Deep Learning[D]. Zhejiang University, 2019.
X.Y. Zou, J.H. Huang, J.J. Huang. Artificial Intelligence Drives High-Quality Development of Aluminum Processing Products—A Case Study of the Aluminum Processing Industry[J]. Digitization user, 2021 (51): 79-81.
J.F. Fatriansyah, R.K. Rizqillah, I. Suhariadi, et al. Composition-based aluminum alloy selection using an artificial neural network[J]. Modelling and Simulation in Materials Science and Engineering, 2023, 31(5): 55.
Z.Q. Chen. Application of Ultrasonic Welding Machine in Printing CTP Plate Production Line[J]. Modern Manufacturing Technology and Equipment, 2017 (10): 136-137.
J.H. Han, W.M. Jie, D.P. Chen, et al. Research Progress on 3D Printing of Aluminum-Based Energetic Materials[J]. Journal of Explosives and Propellants, 2023, 46(11): 937-949.
Z. Tan. Research on 3D Printing of Porous Aluminum in Vehicle Collision Energy Absorption [J]. Farm Machinery Use and Maintenance, 2020 (11): 41-42.
J.B. Cui, R.J. Zhao. Design and Manufacturing of High-Performance Reflective Aluminum Mirrors Using 3D Printing[J]. Integrated Circuit Applications, 2021, 38(07): 40-42.
DOI: https://doi.org/10.33142/rams.v6i2.14412
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Danchen LIU
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.