Research and Application of Materials Science

Preparation of Na3V2(PO4)3 Cathode Materials by Hydrothermal Assisted Sol-Gel Method for Sodium -Ion Batteries

LIJiayu

Abstract


Na3V2(PO4)3 (NVP) cathode material of the sodium ion battery (1 C=117 mAh g-1) has a NASICON-type structure, which not only facilitates the rapid migration of sodium ions, but also has a small volume deformation during sodium ion de-intercalation and the main frame mechanism remains unchanged, and thus is seen as an energy storage material for a wide range of applications, but has a limited electronic conductivity due to its structure. In this paper, NVP cathode materials with finer primary particles are successfully prepared using a simple hydrothermal treatment-assisted sol-gel method. The increased pore size of the NVP materials prepared under the hydrothermal process allows for more active sites and more effective resistance to the volume deformation of sodium ions during insertion/extraction processes, effectively facilitating the diffusion of ions and electrons. The Na3V2(PO4)3 material obtained by the optimized process exhibited good crystallinity in XRD characterization, as well as superior electrochemical properties in a series of electrochemical tests. A specific capacitance of 106.3 mAh g-1 at 0.2 C is demonstrated, compared to 96.5 mAh g-1 for Na3V2(PO4)3 without hydrothermal treatment, and cycling performance is also improved with 93% capacity retention. The calculated sodium ion diffusion coefficient (DNa = 5.68 × 10-14) obtained after EIS curve fitting of the improved sample illustrates that the pore structure is beneficial to the performance of the Na3V2(PO4)3 cathode material.

Keywords


Na3V2 (PO4 )3 ; Hydrothermal assisted; Sodium ion; Porosity

Full Text:

PDF

References


Sun B X, Zhao X Z, et al., Virtual Battery Pack-Based Battery Management System Testing Framework, Energies, 2023, 16, 680, https://doi.org/10.3390/en16020680

Singh A N, Nam K W, Solid-state synthesized batteries get upset, Matter, 2022, 5, 1347–1349, https://doi.org/10.1016/j.matt.2022.04.003

Li M, Lu J, Chen Z, et al., 30 Years of Lithium-Ion Batteries, Advanced Materials, 2018, 30, 1800561, https://doi.org/10.1002/adma.201800561.

Chen S, Wu C, Shen L, et al., Challenges and perspectives for NASICON-Type electrode materials for advanced sodium-ion batteries, Advanced Materials, 2017, 29, 1700431, https://doi.org/10.1002/adma.201700431.

Zhang W L, Yin J, et al., Status of rechargeable potassium batteries, Nano Energy, 2021, 83, 105792, https://doi.org/10.1016/j.nanoen.2021.105792.

Ren W, Zhu Z, An Q, et al., Emerging prototype sodium-ion full cells with nanostructured electrode materials, Small, 2017, 13, 1604181, https://doi.org/10.1002/smll.201604181.

Yabuuchi N, Kubota K, et al., Research development on sodium-ion batteries, Chemical Reviews, 2014, 114, 11636-11682, https://doi.org/10.1021/cr500192f.

Jian Z, Zhao L, Pan H, et al., Carbon coated Na3V2(PO4)3, as novel electrode material for sodium ion batteries, Electrochemistry Communications, 2012, 14, 86-89, https://doi.org/10.1016/j.elecom.2011.11.009.

Park S, Wang Z L, et al., Crystal Structure of Na2V2(PO4)3, an Intriguing Phase Spotted in the Na3V2(PO4)3–Na1V2(PO4)3 System, Chemistry of Materials, 2022, 34, 451-462, https://doi.org/10.1021/acs.chemmater.1c04033.

Chen H, Huang Y, Mao G, et al., Reduced graphene oxide decorated Na3V2(PO4)3 microspheres as cathode material with advanced sodium storage performance, Frontiers in Chemistry, 2018, 6, 174, https://doi.org/10.3389/fchem.2018.00174.

Jiang Y, Zhou X, Li D, et al., Highly Reversible Na Storage in Na3V2(PO4)3 by Optimizing Nanostructure and Rational Surface Engineering, Advanced Energy Materials, 2018, 8, 1800068, https://doi.org/10.1002/aenm.201800068.

Bao S, Huang Y Y, et al., Porous Na3V2(PO4)3 as cathode material for high-rate sodium-ion batteries by sacrificed template method, Ionics, 2020, 26, 5011–5018, https://doi.org/10.1007/s11581-020-03635-0.

Wang C, Long H, et al., A multiphase sodium vanadium phosphate cathode material for high-rate sodium-ion batteries, Journal of Materials Science & Technology, 2021, 66, 121–127, https://doi.org/10.1016/j.jmst.2020.05.076.

Senthilkumar B, Murugesan C, et al., Electrochemical insertion of potassium ions in Na4Fe3(PO4)2P2O7 mixed phosphate, Journal of Power Sources, 2020, 480, 228794, https://doi.org/10.1016/j.jpowsour.2020.228794.

Tian Z Y, Chen Y J, et al., Boosting the rate capability and working lifespan of K/Co co-doped Na3V2(PO4)3/C for sodium ion batteries, Ceramics International, 2021, 47, 22025-22034, https://doi.org/10.1016/j.ceramint.2021.04.222.

Jiang X M, Liu C C, et al., Constructing p-type substitution induced by Ca2+ in defective Na3V2−xCax(PO4)3/C wrapped with conductive CNTs for high-performance sodium-ion batteries, Dalton Transactions, 2022, 51, 16145–16157, https://doi.org/ 10.1039/d2dt02602c.

Li J H, Chen Y J, et al., Mechanisms and principles of Na3V2(PO4)3 modification by carbon materials, Current Opinion in Electrochemistry, 2023, 37, 101200, https://doi.org/10.1016/j.coelec.2022.101200.

Lim S Y, Kim H, Shakoor R A, et al., Electrochemical and Thermal Properties of NASICON Structured Na3V2(PO4)3 as a Sodium Rechargeable Battery Cathode: A Combined Experimental and Theoretical Study, Journal of the Electrochemical Society, 2012, 159, A1393-A1397, DOI 10.1149/2.015209jes.

Cheng J, Chen Y J, et al., Na3V2(PO4)3/C⋅ Na3V2(PO4)2F3/C@rGO blended cathode material with elevated energy density for sodium ion batteries, Ceramics International, 2021, 47, 18065–18074, https://doi.org/10.1016/j.ceramint.2021.03.122.

Duan W, Zhu Z, Li H, et al., Na3V2(PO4)3@C core-shell nanocomposites for rechargeable sodium-ion batteries, Journal of Materials Chemistry A, 2014, 2, 8668-8675, DOI: 10.1039/c4ta00106k.

Jiang Y, Yang Z Z, et al., Nanoconfined Carbon-Coated Na3V2(PO4)3 Particles in Mesoporous Carbon Enabling Ultralong Cycle Life for Sodium-Ion Batteries, Advanced Energy Materials, 2015, 5, 1402104, https://doi.org/10.1002/aenm.201402104 .

Delmas C, Braconnier J J, Fouassier C, et al., Electrochemical intercalation of sodium in NaxCoO2 bronzes, Solid State Ionics, 1981, 3, 165-169, https://doi.org/10.1016/0167-2738(81)90076-X.

Keller M, Buchholz D, Passerini S. Layered Na-Ion Cathodes with Outstanding Performance Resulting from the Synergetic Effect of Mixed P- and O-Type Phases, Advanced Energy Materials, 2016, 6, 1501555-1501565, https://doi.org/10.1002/aenm.201501555.

Li G R, Song J, Pan G L, et al., Highly Pt-like electrocatalytic activity of transition metal nitrides for dye-sensitized solar cells, Energy & Environmental Science, 2011, 4, 1680-1683, https://doi.org/10.1039/C1EE01105G.

Du K, Guo H, Hu G, et al.. Na3V2(PO4)3 as cathode material for hybrid lithium ion batteries, Journal of Power Sources, 2013, 223, 284-288, http://dx.doi.org/10.1016/j.jpowsour.2012.09.069.

Li G, Jiang D, Wang H, et al.. Glucose-assisted synthesis of Na3V2(PO4)3/C composite as an electrode material for high-performance sodium-ion batteries, Journal of Power Sources, 2014, 265, 325-334, http://dx.doi.org/10.1016/j.jpowsour.2014.04.054.

Su R Y, Zhu W K, et al.. Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode, Molecules, 2023, 28, 1409, https://doi.org/10.3390/molecules28031409.




DOI: https://doi.org/10.33142/rams.v5i1.11757

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jiayu LI

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.