Preparation and Properties of Bilayer Composite Materials of Cu-coated Fe and CuSn10
Abstract
Keywords
Full Text:
PDFReferences
LI Dongyu, LI Xiaoqiang, LI Jingmao, et al.. Effect of Sintering Process on Microstructure and Properties of Copper-Iron-based Oil-impregnated Bearing[J]. Materials Reports, 2021,35(8):8157-8163.
HUANG Zhao-xuan, LAN Jiang, YANG Shi-yu, et al.. Effect of MoS2 and graphite on friction properties of bronze oil bearing[J]. Powder Metallurgy Technology, 2020,38(5):363-370.
YE Xuan, TU Huajin, QIN Ling, et al.. Properties of Fe-Cu-C composite reinforced by different WC content[J]. IOP Conference Series: Materials Science and Engineering, 2019, 688(3):109-112.
YE Xuan, QIN Ling. Preparation and performance of WC/TiC reinforced iron matrix composites[J]. Powder Metallurgy Industry, 2021,31(4):49-54.
YE Xuan, TU Huajin, QIU Zhiwen, et al.. Effects of WC Content on Pore Morphology and Properties of Fe-1.5Cu-1.8Ni-0.5Mo-1C PM Composite[J]. Hot Working Technology, 2019,48(22): 89-93.
YE Xuan, TU Huajin, QIU Zhiwen, et al.. Effect of WC particle reinforcement on Fe–1.5Cu–1.8Ni–0.5Mo–1C P/M composite[J]. Powder Metallurgy Technology, 2019,37(1):40-45.
WANG Jingxuan, WANG Jiaqi, YIN Yanguo, et al.. Dry Friction Characteristics of FeS/Cu-Bi Copper-Based Sliding Bearing Materials[J]. Bearing, 2020(3):39-43.
ZHANG Shanshan, LI Changyun, PAN Yuewu, et al.. Application and preparation of copper-coated iron powders[J]. Powder Metallurgy Technology, 2020,38(6):465-474.
Yang Lei, Gao Qiu, Liu Hong, et al.. Fabrication and Properties of Dual-Gradient Nanostructured Copper Matrix Composites Reinforced by Silicon Carbide Particles[J]. Powder Metallurgy Technology, 2016,34(6):428-433.
DOI: https://doi.org/10.33142/rams.v5i2.12709
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Xuan YE, Ling QIN, Yuxiang LING
![Creative Commons License](http://licensebuttons.net/l/by-nc-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.