Research and Application of Materials Science

Synthesis and Mechanical Properties of C/PLA 3D Printing Composites Based on Waste Rice Noodles

YANGJie, JINXinyan, LIUYan, CHENShuoping

Abstract


Spherical carbon particles were prepared by using waste Guilin rice noodles as raw materials. By blending the rice noodles based carbon (RC) powders with polylactic acid (PLA), A series of black RC/PLA 3D printing composites were synthesized and characterized. The mechanical testing result shows that the RC/PLA 3D printing composites display better mechanical properties than that of pure PLA. Moreover, the composite with carbon treated with high temperature carbonization has better impact strength.

Keywords


Waste Guilin rice noodles; RC/PLA 3D printing composite

Full Text:

PDF

References


L Li, Y Chen, T Yu, N. Wang, C. Wang, H. Wang, Preparation of polylactic acid/TEMPO-oxidized bacterial cellulose nanocomposites for 3D printing via Pickering emulsion approach, Composites Communications, 2019, 16: 162-167.

C Murphy, M N Collins. Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing, Polymer Composites, 2016, 39: 1311-1320.

D H Rosenzweig, E Carelli, T Steffen, et al. 3D-Printed ABS and PLA Scaffolds for Cartilage and Nucleus Pulposus Tissue Regeneration, International journal of molecular sciences, 2015, 16: 15118-15135.

Y Zhou, L Lei, B Yang, et al. Preparation and characterization of polylactic acid (PLA) carbon nanotube nanocomposites. Polymer Testing, 2018, 68: 34-38.

H S Patanwala, D Hong, S R Vora, et al. The microstructure and mechanical properties of 3D printed carbon nanotube-polylactic acid composites. Polymer Composites ,2018, 39: E1060-E1071.

R Chen, M Misra, A K Mohanty. Injection-moulded biocomposites from polylactic acid (PLA) and recycled carbon fibre: Evaluation of mechanical and thermal properties. Journal of Thermoplastic Composite Materials, 2014, 27 (9): 1286-1300.

C T Hsieh, Y J Pan, C W Lou, et al. Polylactic Acid/Carbon Fiber Composites: Effects of Functionalized Elastomers on Mechanical Properties, Thermal Behavior, Surface Compatibility, and Electrical Characteristics. Fibers and Polymers, 2016, 17 (4): 615-623.

J Wei, H Wang, Q Zhang, et al. One-pot Hydrothermal Synthesis of N-Doped Carbon Quantum Dots Using the Waste of Shrimp for Hydrogen Evolution from Formic Acid. Chemistry Letters, 2015, 44 (3): 241-243.

F Li, Y Tang, H Wang, et al. Functionalized hydrothermal carbon derived from waste pomelo peel as solid-phase extractant for the removal of uranyl from aqueous solution. Environmental Science and Pollution Research, 2017, 24 (28): 22321-22331.

A Jain, R Balasubramanian, M P Srinivasan. Production of high surface area mesoporous activated carbons from waste biomass using hydrogen peroxide-mediated hydrothermal treatment for adsorption applications. Chemical Engineering Journal, 2015, 273: 622-629.

H Abdolmohammad Zadeh, E Rahimpour. A novel chemosensor based on graphitic carbon nitride quantum dots and potassium ferricyanide chemiluminescence system for Hg(II) ion detection. Sensors and Actuators B: Chemical, 2016, 225: 258-266.




DOI: https://doi.org/10.33142/rams.v3i1.4495

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Jie YANG, Xinyan JIN, Yan LIU, Shuoping CHEN

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.