Research and Application of Materials Science

Research Status and Application Prospect of Aluminum Matrix Composites

DINGWanwu, CHENGYan, CHENTaili, ZHAOXiaoyan, LIUXiaoxiong

Abstract


Aluminum matrix composite is one of the most attractive metal matrix composites. It is a kind of material with strong vitality emerging in response to the needs of modern scientific development. Compared with traditional materials, aluminum matrix composites have the advantages of low density, good electric conductivity and heat conductivity, good wear resistance and oxidation resistance, high specific strength and stiffness, high temperature resistance, good heat treatment performance and flexible preparation process, which make them widely used in the fields of aviation, aerospace, and automobile. In this paper, the factors affecting the properties of aluminum matrix composites, the strengthening mechanism, classification and preparation methods of aluminum matrix composites are summarized. The research status, development direction and application prospect of aluminum matrix composites are briefly introduced.

Keywords


aluminum matrix composites; research status; application prospect

Full Text:

Untitled

References


ZHAO Y T. In-situ synthesized aluminum matrix composites [M]. Beijing: Science Press, 2016.

HUO X Y, ZHAO Y T, CHEN G, et al. Dry sliding wear properties and mechanism of high silicon aluminum alloy and its in-situ composites. Casting, 2007, 56 (4): 375-379.

ZHANG S, DONG X, ZHAO Y, et al. Preparation and wear properties of TiB2/Al-30Si composites via insitu melt reactions under high-energy ultrasonic field. Transactions of Nonferrous Metals Society of China, 2014, 24(12):3894-3900.

LE Y K, ZHANG Y Y. Research status of particulate reinforced aluminum matrix composites [J]. Development and application of materials, 1997 (05): 33-39.

NICK B, Aluminum matrix composites [J], Reinforced Plastics, 2019.

BRENDEL A, POPESCU C, SCHURMANN H, et al. Interface modification of SiC-fiber/copper matrix composites by applying a titanium interlayer [J]. Surface and Coatings Technology, 2005, 200(1-4):161-164.

YOU J H, BOLT H. Prediction of plastic deformation of fiber-reinforced copper matrix composites [J]. Journal of Nuclear Materials, 2002, 307(1):74-78.

EZHIL V S, VIZHIAN S P. Dry sliding wear behavior of basalt short fiber reinforced aluminum metal matrix composites [J]. Applied Mechanics & Materials, 2014, 592-594:1285-1290.

SU H, GAO W, FENG Z, et al. Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix composites [J]. Materials & Design, 2012, 36(none):590-596.

CHOU T W, NOMURA S, TAYA M, A self-consistent approach to the elastic stiffness of short-fiber composites. J Comp Mater,1980,14:178-188

MICHAL B, JOZEF I LADISLAV K. Influence of Al2O3 particles volume fraction on fracture mechanism in the Cu-Al2O3 system [J]. Materials Letters, 2000, 46(2).

XIAO R L, ZHENG H A, FU D S, et al.Preparation and Application Progress of Aluminum Matrix Composites[J]. Foundry technology, 2015 (5): 1118-1121.

ZHAO L Z, YANG M. Study on particle reinforced aluminum matrix composites [J]. Hot Processing Technology, 2011, 40 (20): 107-110.

KANG Y C, CHAN L I. Tensile properties of nanometric Al2O3 particulate-reinforced aluminum matrix composites [J]. Materials Chemistry and Physics, 2004, 85(2-3):438-443.[15] IBRAHIM I A et al. Journal of Materials Science, 1991; 26: 1137-1156.

QUAN G F, CHAI D L, SONG Y J, et al. Effect of reinforcement phase type and content on mechanical properties of metal matrix composites [J]. Journal of Composites, 1999,16(2): 62-66.

WANG T, ZHANG F, ZHOU X L, et al. Effect of reinforcement phase morphology and distribution on mechanical properties of aluminum matrix composites [J]. Hot Working Process, 2009, 38 (16).

ROSCOE A N. The viscosity of suspensions of rigid spheres. British Journal of Applied Physics, 1952, 3:267-269.

ZHANG Q, XIAO B L, WANG W G, et al. Reactive mechanism and mechanical properties of in-situ composites fabricated from an Al- TiO2 system by friction stir processing. Acta Materialia, 2012, 60(20): 7090-7103.

HSU C J, CHANG C Y, KAO P W, et al. Al-Al3Ti nanocomposites produced in-situ by friction stir-processing. Acta Materialia, 2006, 54: 5241-5249.

VERHOEVEN J D. Fundamentals of physical metallurgy. New York: John Wiley & Sons, Inc., 1975.

EVANS A G, HUTCHINSON J W, MCMEEKING R M. Stress-strain behavior of metal matrix composites with discontinuous reinforcements [J]. Scripta Metallurgica Et Materialia, 1991, 25(1):3-8.

ARSENAULT R J, SHI N. Dislocation due to differences between the coefficients of thermal expansion [J]. Materials Science and Engineering, 1986, 81:175-187.

ARSENAULT R J, WANG L, FENG C R. Strengthening of composites due to microstructural changes in the matrix[J]. Acta Metall Mater, 1991, 39(1):47-57.

XUE J, WANG J, HAN Y F, et al. Behavior of CeO2 additive in in-situ TiB2 particles reinforced 2014 Al alloy composites [J]. Transactions of Nonferrous Metals Society of China, 2012, 22:1012-1017.

RAM N R, PRASADA R A K, DUTTA G L. et al. Forming behavior of Al-TiC in-situ composites [J]. Materials Science Forum, 2013, 765:418-422.

ZHANG Q, XIAO B L, WANG W G, et al. Reactive mechanism and mechanical properties of in-situ composites fabricated from an Al–TiO2 system by friction stir processing [J]. Acta Materialia, 2012, 60(20):7090-7103.

HAO X, NIE H, YE Z, et al. Mechanical properties of a novel fiber metal laminate based on a carbon fiber reinforced Zn-Al alloy composite[J]. Materials Science & Engineering A, 2018.

FENG G, LI Z, JACOB R J. et al. Laser-induced exothermic bonding of carbon fiber/Al composites and TiAl alloys [J]. Materials & Design, 2017, 126:197-206.

NIE M M, XU ZH F, YU H, et al. Effect of matrix alloy on fiber damage and fracture mechanism of continuous M40 graphite fiber / Al composite [J]. Journal of composite materials, 2016 (12).

PAWAR P B, WABALE R M, UTPAT A A. et al. A comprehensive study of aluminum based metal matrix composites: Challenges and Opportunities. Science Direct. 2018: 23937–23944.

YANG O, JIAN J W, XIN R D. et al. Experimental investigation on characteristics of pulsed plasma thrusters with the propellant samples of modified PTFE filled Si, Al and Al2O3 [J]. Vacuum, 2019: 163-171,

HASSAN S, HOSSEIN R B, MOHAMAD R N. The influence of volume fraction of SiC particles on the properties of Al/SiCp nanocomposites produced by powder metallurgy with high energy ball milling [J]. Russian Journal of Non-Ferrous Metals, 2016, 57(7).

SIVAIAH B, SARAVANAN M, AJAY D. Nano-indentation and Wear Characteristics of Al 5083/SiCp Nanocomposites Synthesized by High Energy Ball Milling and Spark Plasma Sintering[J]. Journal of Materials Science & Technology,2012,28(11):969-975.

HUANG G Q, WU J, HOU W T, et al. Microstructure, mechanical properties and strengthening mechanism of titanium particle reinforced aluminum matrix composites produced by submerged friction stir processing [J]. Materials Science & Engineering A, 2018:353–363.

LEKATOU A, KARANTZALIS A E, EVANGELOU A, et al. Aluminum reinforced by WC and TiC nanoparticles (exsitu) and aluminide particles (in-situ): Microstructure, wear and corrosion behavior [J]. Materials & Design, 2015, 65:1121-1135.

XI L X, ZHANG H, WANG P, et al. Comparative investigation of microstructure, mechanical properties and strengthening mechanisms of Al-12Si/TiB2, fabricated by selective laser melting and hot pressing[J]. Ceramics International, 2018: S0272884218316729.

BI J, LEI Z L, CHEN X, et al. Microstructure and mechanical properties of TiB2-reinforced 7075 aluminum matrix composites fabricated by laser melting deposition [J]. Ceramics International, 2019:5680–5692.

ZHANG S L, YANG J, ZHANG B R, et al. A novel fabrication technology of in-situ TiB2/6063Al composites: High energy ball milling and melt in-situ reaction [J]. J Alloys Compound, 2015, 629:215.

IBRAHIM I A et al. Journal of Materials Science, 1991; 26: 1137-1156.

CHEN X, FU D, TENG J, et al. Hot deformation behavior and mechanism of hybrid aluminum-matrix composites reinforced with micro-SiC and nano-TiB2 [J]. Journal of Alloys & Compounds, 2018.

ZHOU C,JI G,CHEN Z,et al. Fabrication interface characterization and modeling of oriented graphite flakes/Si/Al composites for thermal management applications[J]. Materials and Design,2014(63):719-728.

YAN S J,DAI S L,ZHANG X Y,et al. Investigating aluminum alloy reinforced by graphene nano-flakes[J].Materials Science & Engineering A,2014(612):440-444.

SLIPENYUK A, KUPRIN V, MILMAN Y, et al. Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio[J]. Acta Materialia, 2006, 54(1):157-166.

YOU J, LIU Y Z, GU C X, et al. Microstructure and mechanical properties of SiCp/2024 aluminum matrix composites by hot extrusion of powder [J]. Science and Engineering of Powder Metallurgical Materials, 2014 (1).

DING Z L, REN D L, QI H B, et al. Squeeze casting process of SiC particulate reinforced aluminum matrix composites [J]. Special casting and non-ferrous alloys, 1999 (s1): 64-65.

MA Y, HAO Y, KOU S Z, et al. Preparation and mechanical properties of CuO/Al reactive in-situ composites [J]. Journal of Material Heat Treatment, 2003 (1): 37-40.

YANG B, WANG F, ZHANG J S. Microstructural characterization of in situ TiC/Al and TiC/Al-20Si-5Fe-3Cu-1Mg composites prepared by spray deposition[J]. Acta Materialia, 2003, 51(17):4977-4989.

LI X L, CHEN Y B, YANG B L, et al. Morphology evolution of TiC particulates formed by selfpropagating high-temperature synthesis in Al-Ti-C system[J]. Journal of Hebei University of Science and Technology,2010(06):88-93.

ZHU H G, WANG H ZH, XIONG D SH, et al. Microstructure and mechanical properties of aluminum matrix composite synthesized by XD method [J]. Acta metalica Sinica, 2005 (08): 47-52.

SATISH T, SHARMA V K, MOHANTY R M, et al. Microstructure, adhesion and wear of plasma sprayed Al Si-SiC composite coatings [J]. Journal of Surface Engineered Materials and Advanced Technology, 2012, 2(3): 227-232.

QIANG Y H, WANG X H, FENG P Z. Research progress of SiCp reinforced metal matrix composites [J]. Light metals, 2003 (7): 49-51.

SREEKUMAR V M, HARI B N, ESKIN D G, et al. Structureproperty analysis of in-situ Al-MgAl2O4 metal matrix composites synthesized using ultrasonic cavitation[J]. Materials Science and Engineering: A, 2015, 628:30-40.

CHAWLA N, C HAWLA K K. Metal matrix composites [M]. New York: Springer Science Business Media Inc, 2006:353-355.

TAHA M A, EL M N, EL S A. Some experimental data on workability of aluminum particulate-reinforced metal matrix composites [J]. Journal of Materials Processing Technology, 2008, 202(1/3): 380-384.

RAMACHANDRA M, RADHAKRISHNA K. Effect of reinforcement of flyash on sliding wear, slurry erosive wear and corrosive behavior of aluminum matrix composite [J]. Science Direct, 2007, 262(11/12): 1450-1462.

SEYED S M, REIHANI. Processing of squeeze cast Al6061-30vol% SiC composites and their characterization [J]. Materials and Design, 2006, 27(3): 216-222.

HAN H H, WANG A Q, XIE J P. Research status of SiC and Si particle reinforced aluminum matrix composites [J]. Powder metallurgy industry, 2015, 25 (06): 66-71.

CHENG Z F, ZHANG B, WANG P, et al. Application of SiC/A composite material in airborne photoelectric stabilization platform [J]. Journal of Changchun University of Technology (Natural Science Edition), 2011, 34 (1): 130-133.

NIE J H, FAN J Z, WEI S H, et al. Development and application of aeronautical powder metallurgy particle reinforced aluminum matrix composites [J]. Aviation manufacturing technology, 2017 (16): 26-36.

WANG T, ZHAO Y X, FU S H, et al. Development and key issues of continuous fiber reinforced metal matrix composites [J]. Journal of Aviation Materials, 2013, 33 (02): 87-96.

MENG L. Research status of fiber reinforced aluminum matrix composites [J]. Science and technology information, 2009 (18): 437-438.

ZHONG L, HAN X, ZHOU S Q. Research progress of fiber reinforced aluminum matrix composites [J]. Mechanical engineering materials, 2002 (12): 12-14.

ZHOU T, ZHOU X Y, DA J C, et al. Research progress of carbon fiber reinforced metal matrix composites [J]. Hot processing technology, 2016, 45 (18): 31-32+37.

XUE Y, SONG M, XIAO D H. Preparation and mechanical properties of particulate reinforced aluminum matrix composites [J]. Natural Journal, 2015, 37 (01): 41-48.

FAN J Z, SHI L K. Research and application development of particulate reinforced aluminum matrix composites [J]. Aerospace materials technology, 2012, 42 (01): 1-7.

HUANG G Q,WU J,HOU W T, et al. Microstructure, mechanical properties and strengthening mechanism of titanium particle reinforced aluminum matrix composites produced by submerged friction stir processing [J]. Materials Science & Engineering A, 2018:353–363.

PAN L W, LIN W D, TANG J F, et al. Preparation methods and research status of particulate reinforced aluminum matrix composites [J]. Material report, 2016, 30 (S1): 511-515.




DOI: https://doi.org/10.33142/msra.v2i1.1975

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Wanwu DING, Yan CHENG, Taili CHEN, Xiaoyan ZHAO, Xiaoxiong LIU

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.