|
Issue |
Title |
|
Vol 1, No 1 (2019) |
A Prediction Method for TBM Cutterhead Dynamic Tunneling Performance under Typical Composite Geological Conditions |
Abstract
PDF
|
Jingxiu Ling, Xiaojing Yang, Zhihong Wu |
|
Vol 2, No 1 (2020) |
Analytic solution for size-dependent behaviors of micro-beam under forced vibration |
Abstract
PDF
|
Shuai WANG, Zhiyong WANG, Feifei WANG, Bo ZHOU, Shifeng XUE |
|
Vol 1, No 2 (2019) |
Application of Millimeter 3D Automatic Paving System in Highway Engineering Construction |
Abstract
Untitled
PDF
|
Yi DONG, Jie WANG, Yijia MAO, Hua LI |
|
Vol 1, No 2 (2019) |
Application of Xgboost Feature Extraction in Fault Diagnosis of Rolling Bearing |
Abstract
PDF
|
Xingang WANG, Chao WANG |
|
Vol 1, No 1 (2019) |
Cement Pavement Surface Crack Detection Based on Image Processing |
Abstract
PDF
|
Hongwei Lei, Jianlian Cheng, Qi Xu |
|
Vol 1, No 1 (2019) |
Computing Method of Multivariate Process Capability Index Based on Normalized Pretreatment |
Abstract
PDF
|
Guangqi Ying, Yan Ran, Genbao Zhang, Yuxin Liu, Shengyong Zhang |
|
Vol 2, No 1 (2020) |
Design and Engineering Application of Direct Mixing Lubrication System for Emulsion Pipeline in Secondary Cold Rolling Mill |
Abstract
PDF
|
Hangzhe DONG, Yazhen ZHANG, Wantong HU, Zhenhua BA, Yanyan ZHANG |
|
Vol 1, No 1 (2019) |
Design and Selection of Servomotor for Radial Aircraft Tire Secondary Molding Machine |
Abstract
PDF
|
Chaoqun Wang |
|
Vol 1, No 1 (2019) |
Design of New Elevator Pressure Guide Plate and Its Test Device |
Abstract
PDF
|
Qihang Xu, Shaoke Chen |
|
Vol 2, No 2 (2020) |
Dynamic optimization analysis of hydraulic pipeline system based on a developed response surface method |
Abstract
PDF
|
Hongquan QU, Jianlin SUN, Xu YAN, Yuanlin ZHANG, Xuefeng LIU, Tao YU, Huawei HAN, Langjun XU |
|
Vol 1, No 2 (2019) |
Effect of Microstructures and Mechanical Properties of Large Deformation High Entropy Alloy CoCrCuFeNi in Semi-solid Isothermal Heat Treatment |
Abstract
PDF
|
Lajie WANG, Jiao XIONG, Jun LIU, X J YANG |
|
Vol 1, No 2 (2019) |
Embedded Sensor System for Five-degree-of-freedom Error Detection on Machine Tools |
Abstract
PDF
|
Yubin Huang, Kuang-Chao Fan, Wei Sun |
|
Vol 2, No 2 (2020) |
Experimental Simulation and Verification of Position Servo Control of Mechanical Rodless Cylinder |
Abstract
PDF
|
Yeming ZHANG, Kaimin LI, Hongwei YUE, Shuangyang HE, Dongyuan LI, Kun LYU, Feng WEI |
|
Vol 2, No 2 (2020) |
Integration of measurement and simulation of film pressure for estimating deformation of a glass sheet on a noncontact air conveyor |
Abstract
PDF
|
Rui YANG, Wei ZHONG, Rongyue WANG, Chong LI, Jiwen FANG |
|
Vol 2, No 1 (2020) |
Modeling size-dependent behaviors of axially functionally graded Bernoulli-Euler micro-beam |
Abstract
PDF
|
Shuai WANG, Zetian KANG, Shichen ZHOU, Bo ZHOU, Shifeng XUE |
|
Vol 1, No 2 (2019) |
Optimization of Process Parameters of Laser Cladding 304L Alloy Powder Based on Orthogonal Experiment |
Abstract
PDF
|
Linsen SHU, Bo WANG, Yayin HE |
|
Vol 1, No 1 (2019) |
Optimization of the Hot Pressing Process for Preparing Flax Fiber/ PE Thermoplastic Composite |
Abstract
PDF
|
Yiqi Wang, Guangpeng Cui, Zhujian Shao, Yongjie Bao, Hang Gao |
|
Vol 2, No 2 (2020) |
Robust Sliding Mode Control for a 2-DOF Lower Limb Exoskeleton Base on Linear Extended State Observer |
Abstract
PDF
|
Zhenlei CHEN, Qing GUO, Yao YAN, Dan JIANG |
|
Vol 2, No 1 (2020) |
Seeding Performance Simulations and Experiments for a Spoon-Wheel Type Precision Cottonseed-Metering Device Based on EDEM |
Abstract
PDF
|
Yudao LI, Shulun XING, Shasha LI, Li Liu, Xiaohui ZHANG, Zhanhua SONG, Fade LI |
|
Vol 2, No 1 (2020) |
Simulation and Experimental Study on Load-bearing Deformation Characteristics of 11R22.5 Vehicle Retreaded Tire |
Abstract
PDF
|
Qiang WANG, Li JIANG, Xiaojie QI |
|
Vol 2, No 2 (2020) |
Simulation research on dynamic performance of the new type high-pressure solenoid valve |
Abstract
PDF
|
Qihui YU, Qiancheng WANG, Kaifei ZHANG, Weiwei ZHENG |
|
Vol 1, No 1 (2019) |
Strength Evaluation of a Bogie Frame by Different Methods |
Abstract
PDF
|
Daoyun Chen, Shouguang Sun, Qiang Li |
|
Vol 1, No 1 (2019) |
Study on Surface Roughness in Micro Milling of Single Crystal Materials |
Abstract
PDF
|
Qi Gao, Po Jin, Guangyan Guo |
|
Vol 1, No 2 (2019) |
Study on the Cutting Temperature of the Textured Tool by 3D FEA Simulation |
Abstract
PDF
|
Siwen TANG, Pengfei LIU, Rui WANG, Qiulin NIU, Guoqing YANG, Wenhui LIU, Qian LIU |
|
Vol 1, No 1 (2019) |
Study on Vertical Vibration Characteristics of the 2-DOF Strip Rolling Mill Model with a Single Weak Defect on the Work Roll Bearing Outer Raceway |
Abstract
PDF
|
Zhengnan Sun, Dongxiao Hou, Liang Xu, Peiming Shi |
|
1 - 25 of 28 Items |
1 2 > >> |